DS200DTBAG1 GE电源驱动控制板 提供了预接线背板

DS200DTBAG1  GE电源驱动控制板 提供了预接线背板

DS200DTBAG1 技术规格

产品描述

GE数字接触式端子板DS200DTBAG1具有两个接线端子，每个接线端子连接95根电线。DS200DTBAG1 还具有 5 个跳线和 2 个 2 针连接器。断开驱动器与电源的连接后，您可以开始更换驱动器。由于有 190 根信号线连接到接线端子，因此您必须记录电线的连接位置。为了方便起见，端子具有字母和数字名称，您可以将名称信息附加到电线上。如果DS200DTBAG1端子上连接了大量电线，请留出足够的时间来识别电线上的端子。对其他连接器执行相同的操作。

跳线设置为定义电路板的配置，因此为了确保更换板与旧板相同，您必须将跳线设置在相同的位置。某些跳线仅在出厂时用于测试目的，由于不支持备用位置的配置而无法移动。无论如何，使用印在以JP为前缀的板上的名称记录旧板上所有五个跳线的位置。例如 JP1、JP2 和 JP3。通过将一端连接到无油漆的金属表面并将另一端缠绕在手腕上来设置腕带。打开保护袋，滑出板子，将板子放在袋子的顶部

The GE digital contact terminal board DS200DTBAG1 has two terminals, each connected to 95 wires. The DS200DTBAG1 also has 5 jumpers and 2 2-pin connectors. After disconnecting the drive from the power supply, you can begin replacing the drive. Since there are 190 signal wires connected to the terminals, you must record the connection location of the wires. For convenience, terminals have alphabetic and numeric names that you can attach to the wire. If a large number of wires are connected to the DS200DTBAG1 terminal, allow sufficient time to identify the terminals on the wires. Do the same for other connectors.

The jumper settings define the configuration of the circuit board, so to ensure that the replacement board is the same as the old board, you must set the jumper in the same location. Some jumpers are only used for testing purposes at the factory and cannot be moved because they do not support alternate location configurations. Regardless, use the name printed on the board prefixed with JP to record the location of all five jumpers on the old board. For example, JP1, JP2, and JP3. Set the wrist strap by connecting one end to a paintless metal surface and wrapping the other end around the wrist. Open the protective bag, slide out the board, and place the board on the top of the bag

DS200DTBAG1 的常见问题

DS200DTBAG1 用于哪些输入？

DS200DTBAG1 有哪些类型的跳线？

DS200DTBAG1的输入电压范围是多少？

DS200DTBAG1的输入电压范围为24 VDC至125 VDC。如果DS200DTBAG1处于24 VDC，则必须使用外部电源