DS200GGDAG1AGD GE GTO栅极驱动板

DS200GGDAG1AGD 技术规格

产品描述

GE GTO栅极驱动板DS200GGDAG1AGD具有2个3针连接器和2个卡口连接器。GE GTO栅极驱动板DS200GGDAG1AGD还包含2组4个LED。每组有 1 个红色 LED、1 个琥珀色 LED 和 2 个绿色 LED。GE GTO栅极驱动器板DS200GGDAG1AGD还具有安装在板上的20 VDC电容。关闭驱动器电源以执行更换过程时，在处理组件之前，让电容器中的电流退出非常重要。这是正确的，因为电容器在正常工作期间存储和释放高压。高电压将在三十秒后离开电容器。

一种预防措施是在继续操作之前，使用测试仪验证驱动器中是否没有所有电压。确保探头绝缘良好，材料状况良好。

始终需要佩戴 DS200GGDAG1AGDEDS 保护装置，因为电路板上的静电积聚会损坏电路板。一种常见的 ESD 设备是腕带，它为静电提供一条路径，使其通过裸露的金属表面（如桌腿或任何其他金属结构）寻找地面。表带的一端连接到您的手臂或手上，另一端夹在金属结构上。一些 EDS 带子或者有一个插头连接器，可以安装到工作台腿上的插座中。它提供了更安全的连接。EDS 设备仅在两端连接时才保护电路板。


The GE GTO gate drive board DS200GGDAG1AGD has two 3-pin connectors and two bayonet connectors. The GE GTO gate drive board DS200GGDAG1AGD also contains two sets of four LEDs. Each group has 1 red LED, 1 amber LED, and 2 green LEDs. The GE GTO gate driver board DS200GGDAG1AGD also has a board mounted 20 VDC capacitor. When powering off the drive to perform the replacement process, it is important to allow the current in the capacitor to exit before processing the component. This is correct because capacitors store and release high voltages during normal operation. The high voltage will leave the capacitor in thirty seconds.
One preventive measure is to use a tester to verify that all voltages are not present in the driver before continuing operation. Ensure that the probe insulation is good and the material condition is good.


It is always necessary to wear a DS200GGDAG1AGDEDS protective device because static electricity accumulation on the circuit board can damage the circuit board. A common ESD device is a wrist strap, which provides a path for static electricity to find the ground through exposed metal surfaces such as table legs or any other metal structure. One end of the strap is attached to your arm or hand, and the other end is clipped to a metal structure. Some EDS straps or have a plug connector that can be installed into a socket on the leg of the workbench. It provides a more secure connection. EDS devices only protect the circuit board when connected at both ends.

品牌介绍：

GE通用电气Mark VI速创涡轮机控制系统是GE涡轮机目前很好的控制系统。它是一个完整的集成控制系统，具有保护和监控功能，适用于燃气轮机和蒸汽轮机的发电机和机械驱动应用。GE能源LS2100静态起动控制系统是一种可调速交流变频器应用，用于启动燃气轮机发电机组。该系统用于加速涡轮机组，并为燃气轮机提供佳的启动条件阵列。
GE通用电气Speedtronic Mark IV燃气轮机控制系统仍然是可靠的解决方案，尽管该系列已经过时。该系列提供了一个坚固可靠的控制系统，非常适合其应用。



给我们打电话
电话：+86 15359317083
给我们发电子邮件
电子邮件 ： 3433465711@qq.com  
地址 厦门市思明区吕岭路1733号创想中心2009室

正常营业时间 ：
周一至周五 8：00AM - 6：00PM 中部时间