DS200IIBDG1AFA GE AC2000I IGBT驱动板

DS200IIBDG1AFA   GE AC2000I IGBT驱动板
DS200IIBDG1AFA   GE AC2000I IGBT驱动板

DS200IIBDG1AFA 技术指标

产品描述

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1AFA包含9个指示灯LED，提供板的状态。从DS200IIBDG1AFA电路板机柜内部可以看到 LED，点亮时呈红色。 驱动器中的板柜设计用于容纳多个板，并提供了一个结构供您用螺钉连接板。该板包含 6 个用于此目的的螺丝孔。

使用螺丝刀拧紧螺丝，但必须注意不要用螺丝刀触摸板上的任何组件。组件很容易损坏，您可能会损坏电路板。另外，请勿将螺钉掉入电路板，并确保螺钉已拧紧，以免它们松动并从板上脱落。但是，不要过度拧紧螺钉，从而破裂或以其他方式损坏DS200IIBDG1AFA电路板。只有当您准备更换电路板时，才应从保护袋中取出电路板。袋子有助于防止静电积聚在板上。静电可能会损坏电路板.为防止静电积聚，您应该在握住板子时限制您的移动。运动会导致静电积聚。在寒冷干燥的天气条件下尤其如此。

在触摸任何东西之前，使用测试仪确保驱动器和所有组件没有所有电源。在开始此过程之前，请在驱动器中的多个位置测试电源。

The GE Insulated Gate Bipolar Transistor (IGBT) board DS200IIBDG1AFA contains 9 indicator LEDs that provide the status of the board. From the inside of the DS200IIBDG1AFA circuit board cabinet, you can see LEDs that are red when lit. The board cabinet in the drive is designed to accommodate multiple boards and provides a structure for you to screw the boards together. The board contains six screw holes for this purpose.
Use a screwdriver to tighten the screws, but be careful not to touch any components on the board with a screwdriver. Components are easily damaged, and you may damage the circuit board. In addition, do not drop the screws into the circuit board, and ensure that the screws are tightened to prevent them from loosening and falling off the board. However, do not overtighten the screws, which can rupture or otherwise damage the DS200IIBDG1AFA circuit board. Only remove the circuit board from the protective bag when you are ready to replace it. The bag helps prevent static electricity from accumulating on the board. Static electricity can damage circuit boards. To prevent static electricity from accumulating, you should limit your movement while holding the board. Exercise can cause static electricity to accumulate. This is especially true in cold and dry weather conditions.

Before touching anything, use a tester to ensure that the driver and all components are not powered by all power. Before starting this process, test the power supply at multiple locations in the drive.