DS200IIBDG1AEA GE IGBT板可在工作时提供板的状态

DS200IIBDG1AEA  GE  IGBT板可在工作时提供板的状态

DS200IIBDG1AEA 技术指标

产品描述

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1AEA包含9个指示灯LED，可在工作时提供板的状态。从DS200IIBDG1AEA电路板机柜内部可以看到 LED，点亮时呈红色。 考虑到这一点，因为您只能在机柜门打开的情况下看到 LED，并且当驱动器通电时，您必须遵守一些准则以避免触电查看 LED。所有电路板都必须被视为高压元件，并且您不得接触板柜中的任何东西。

另外，当门打开时，不要让任何东西掉进机柜。如果机柜中有螺丝、电线或其他物品掉落，则必须断开驱动器的所有电源。然后，等待三分钟，让所有电源离开组件。然后，找到该项目并搜索可能掉入的其他部分。您可能需要用真空吸尘器清除组件以确保清除所有碎屑。

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1AEA包含一个34针连接器，用于连接带状电缆。连接带状电缆时，只需从连接器上抓住电缆并将连接器压入到位。切勿握住带状电缆将带状电缆拉出。DS200IIBDG1AEA在板上包含三个8引脚连接器，这些连接器标记为APL、BPL和CPL。 连接器的电缆在机柜内布线，并连接到机柜内的其他板。

The GE Insulated Gate Bipolar Transistor (IGBT) board DS200IIBDG1AEA contains 9 indicator LEDs that provide the status of the board during operation. The LED can be seen from the inside of the DS200IIBDG1AEA circuit board cabinet and appears red when lit. With this in mind, you can only see LEDs when the cabinet door is open, and when the drive is powered on, you must follow some guidelines to avoid electric shock viewing LEDs. All circuit boards must be considered high-voltage components, and you must not touch anything in the board cabinet.
In addition, when the door is open, do not let anything fall into the cabinet. If screws, wires, or other items fall from the cabinet, all power to the drive must be disconnected. Then, wait three minutes for all power to leave the component. Then, locate the item and search for other parts that may fall into it. You may need to vacuum the components to ensure that all debris is removed.

The GE Insulated Gate Bipolar Transistor (IGBT) board DS200IIBDG1AEA contains a 34 pin connector for connecting ribbon cables. To connect a ribbon cable, simply grasp the cable from the connector and press the connector into place. Do not hold the ribbon cable and pull it out. The DS200IIBDG1AEA contains three 8-pin connectors on the board, labeled APL, BPL, and CPL. The cables for the connectors are routed within the cabinet and connected to other boards within the cabinet.