DS200IIBDG1ADA

DS200IIBDG1ADA 技术指标

产品描述

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1ADA包含9个指示灯LED，提供电路板处理状态。 从电路板机柜内部可以看到 LED，点亮时呈红色。

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1ADA安装在驱动器的印刷电路板柜中。由于机柜包含多个板和在整个机柜中布线的多根电缆，因此请务必遵循一些基本准则以避免损坏板。插入或移除电路板时，请确保不要触摸机柜中的其他电路板并折断组件。此外，在某些情况下，您可能需要卸下一块板才能访问要更换的板。请务必将电路板更换到您卸下它的相同位置。并重新连接所有电缆。重新启动驱动器时，请验证更换的主板是否正常工作，并检查卸下的主板的操作情况，以便访问需要更换的主板。

更换GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1ADA后，可以使用指示灯LED验证电路板是否正常工作。但是，您必须了解，在为驱动器通电时，当您打开机柜门查看指示灯 LED 时，存在电击风险。查看 LED 时，请勿触摸机柜中的任何组件，这一点很重要。

The GE Insulated Gate Bipolar Transistor (IGBT) board DS200IIBDG1ADA contains 9 indicator LEDs to provide circuit board processing status. The LED can be seen from inside the circuit board cabinet and is red when lit.

The GE insulated gate bipolar transistor (IGBT) board DS200IIBDG1ADA is installed in the printed circuit board cabinet of the driver. Since the cabinet contains multiple boards and multiple cables routed throughout the cabinet, it is important to follow some basic guidelines to avoid damaging the boards. When inserting or removing a circuit board, make sure not to touch other circuit boards in the cabinet and break components. In addition, in some cases, you may need to remove a board to access the board to be replaced. Be sure to replace the circuit board to the same location where you removed it. And reconnect all cables. When restarting the drive, verify that the replaced motherboard is working properly, and check the operation of the removed motherboard to access the motherboard that needs to be replaced.
After replacing the GE insulated gate bipolar transistor (IGBT) board DS200IIBDG1ADA, you can use the indicator LEDs to verify that the circuit board is working properly. However, you must understand that there is a risk of electric shock when you open the cabinet door to view the indicator LEDs while powering up the drive. When viewing LEDs, it is important not to touch any components in the cabinet.