DS200IIBDG1AAA GE 绝缘栅双极晶体管

DS200IIBDG1AAA   GE 绝缘栅双极晶体管


DS200IIBDG1AAA 技术指标

产品描述

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1AAA包含9个指示灯LED，提供电路板处理状态。从电路板机柜内部可以看到 LED，点亮时呈红色。

六个螺钉将电路板固定在驱动器柜中，在更换过程中，您必须使用螺丝刀将其松开。您在手术过程中使用的任何手动工具都必须获得电气应用的批准。一些手工工具似乎是一种绝缘材料。它不是，并且可能会导致电击或电灼伤，或驱动器中的组件损坏。此外，检查手动工具是否有损坏的绝缘层或绝缘层缺失、破裂或磨损。

使用螺丝刀松开将DS200IIBDG1AAA主板固定在驱动器中的螺钉时，请确保不要碰到驱动器中的其他组件。驱动器中主板上的组件很脆弱，可能会弯曲、折断或损坏。如果可能，请清楚地看到电路板和机柜中的所有组件，以避免触摸组件。卸下固定DS200IIBDG1AAA电路板的六个螺钉时，请确保螺钉不会掉入驱动器柜中，并将螺钉放在一边以备将来使用。如果一个或多个螺钉落在机柜中，则必须将它们从驱动器中卸下。您可以通过目视检查找到螺钉，也可以使用手动真空吸尘器清洁该区域。

The GE Insulated Gate Bipolar Transistor (IGBT) board DS200IIBDG1AAA contains 9 indicator LEDs to provide circuit board processing status. The LED can be seen from inside the circuit board cabinet and is red when lit.
The six screws secure the circuit board to the drive cabinet, and you must use a screwdriver to loosen it during the replacement process. Any hand tools you use during surgery must be approved for electrical applications. Some hand tools seem to be an insulating material. It is not, and may cause electric shock or burns, or damage to components in the drive. In addition, check hand tools for damaged insulation or missing, cracked, or worn insulation.

When using a screwdriver to loosen the screw that secures the DS200IIBDG1AAA motherboard to the drive, make sure not to touch other components in the drive. The components on the motherboard in the drive are fragile and can be bent, broken, or damaged. If possible, clearly see all components in the circuit board and cabinet to avoid touching them. When removing the six screws that secure the DS200IIBDG1AAA circuit board, ensure that the screws do not fall into the drive cabinet, and set the screws aside for future use. If one or more screws fall into the enclosure, they must be removed from the drive. You can find the screws by visual inspection or clean the area using a manual vacuum cleaner.