DS200IIBDG1A 通用电气电路板 包含9个指示灯LED

DS200IIBDG1A  通用电气电路板 包含9个指示灯LED


产品描述

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1A包含9个指示灯LED，提供电路板处理状态。 从电路板机柜内部可以看到 LED，点亮时呈红色。

GE绝缘栅双极晶体管（IGBT）板DS200IIBDG1A有多个连接器，安装替换板时，必须确保将电缆连接在完全相同的连接器中。要确保将它们重新连接到相同的连接器，请检查有缺陷的电路板并记下指示已连接电缆的连接器的连接器标识符。然后制作标签并将它们贴在电缆上，以显示在新板上连接能力的位置。

此外，DS200IIBDG1A包含一个或多个跳线，用于配置板以特定方式处理驱动器的信息。工厂设置的其他跳线仅用于测试目的。开发板附带的信息标识跳线，并描述跳线设置以及它们如何更改开发板行为。

当DS200IIBDG1A电路板通电并且驱动器正在运行时，LED 指示电路板的操作。由于 LED 仅在向电路板通电时才可见，因此在打开机柜时必须格外小心。查看 LED 时，请勿触摸驱动器中的任何组件，并确保驱动器中没有掉落任何金属、污垢或其他碎屑。

The GE Insulated Gate Bipolar Transistor (IGBT) board DS200IIBDG1A contains 9 indicator LEDs to provide circuit board processing status. The LED can be seen from inside the circuit board cabinet and is red when lit.
The GE insulated gate bipolar transistor (IGBT) board DS200IIBDG1A has multiple connectors. When installing a replacement board, it is necessary to ensure that the cables are connected in exactly the same connectors. To ensure that they are reconnected to the same connector, check the defective circuit board and note the connector identifier indicating the connector to which the cable is connected. Then make labels and attach them to the cable to show the location of the connection capability on the new board.
In addition, the DS200IIBDG1A includes one or more jumpers for configuring the board to process driver information in a specific manner. Other factory set jumpers are for testing purposes only. The information provided with the development board identifies the jumpers and describes the jumper settings and how they change the development board behavior.

When the DS200IIBDG1A circuit board is powered up and the driver is running, LEDs indicate the operation of the circuit board. Since LEDs are only visible when powering up the circuit board, extreme caution must be taken when opening the cabinet. When viewing LEDs, do not touch any components in the drive and ensure that no metal, dirt, or other debris has fallen from the drive.