DS200LDCCH1AGA 用作驱动控制和局域网（LAN）通信板
DS200LDCCH1AGA 技术指标
| 说明书 | GEI-100216 |
| 制造者 | 通用电气通用电气 |
| 部件号 | DS200LDCCH1AGA |
| 产品类型 | 驱动器控制/局域网通信板 |
| 系列 | 马克五世 |
产品描述
通用电气开发了DS200LDCCH1AGA卡，用作驱动控制和局域网（LAN）通信板。该卡安装在与GE品牌DIRECTO-MATIC 2000驱动器和励磁器兼容的Mark V系列替换驱动板中。当安装在驱动器中时，DS200LDCCH1AGA为驱动器提供一系列驱动器和 I/O 控制功能。
DS200LDCCH1AGA通信卡内置四个微处理器。LAN 控制处理器 （LCP） 可用于接受馈送到驱动器的五种不同总线类型。驱动控制处理器 （DCP） 也可用于处理模拟和数字 I/O 转换。DS200LDCCH1AGA还能够控制和转换编码器和定时器等外围 I/O 设备。 提供电机控制处理器 （MCP） 来处理发送到驱动器的数字 I/O。如果计算需要DCP无法提供的额外处理能力，则协电机处理器（CMP）将提供完成这些功能所需的额外功率。该板配有一个字母数字键盘，用于系统编程和诊断目的。
General Electric has developed the DS200LDCCH1AGA card as a driver control and local area network (LAN) communication board. The card is installed in a Mark V series replacement drive board that is compatible with GE branded DIRECTO-MATIC 2000 drives and exciters. When installed in a drive, the DS200LDCCH1AGA provides a range of drive and I/O control functions for the drive.
The DS200LDCCH1AGA communication card has four microprocessors built in. The LAN Control Processor (LCP) can be used to accept five different bus types fed to drives. The Drive Control Processor (DCP) can also be used to handle analog and digital I/O conversion. The DS200LDCCH1AGA can also control and convert peripheral I/O devices such as encoders and timers. A motor control processor (MCP) is provided to handle digital I/O sent to the driver. If the calculation requires additional processing power that DCP cannot provide, the co motor processor (CMP) will provide the additional power required to complete these functions. The board is equipped with an alphanumeric keypad for system programming and diagnostic purposes.
