3BSE013242R1 TC514-2V1 ABB 辅助接口板

3BSE013242R1特征：
在3BSE013242R1模拟点对点模式中，IMFEC11模块可连接来自FSK的多达15个离散模拟过程输入智能设备并与这些设备进行（数字）通信。此外，IMFEC11模块可以连接以下各项的混合常规变送器和其他外部模拟输入同时在该模式下操作。这些设备只能向FEC模块输入过程数据；他们无法与单元在点对点操作中，每个设备都是单独的有线连接到模拟输入端接单元或模块。

3BSE013242R1模块的设计与所有INFI 90 OPEN模块一样，允许在创建过程管理时具有灵活性系统该模块支持Bailey Fischer&Porter FSK数字智能变送器和其他传统智能设备变送器和标准电压或电流输入。3BSE013242R1数字功能（IMFEC11）消除了转换误差并提高过程控制精度。访问是始终可用于实时进程状态。在现场总线中模式下，所有信息（包括过程变量）在FEC模块和现场设备之间以数字方式传输。FEC模块存储过程数据、控制命令和存储器中的变送器配置数据。它可以恢复如果出现通信故障，则与变送器进行通信发生。在恢复与故障发射机ter的通信后，3BSE013242R1模块检查发射机配置在控制模块（MFP/MFC）恢复更新之前过程控制。


In 3BSE013242R1 analog point-to-point mode, the IMFEC11 module can connect up to 15 discrete analog process input intelligent devices from FSK and conduct (digital) communication with these devices. In addition, the IMFEC11 module can connect the following hybrid conventional transmitters and other external analog inputs to operate in this mode at the same time. These devices can only input process data to FEC module; They cannot operate with the unit in a point-to-point manner. Each device is connected to the analog input terminal unit or module separately and wired.
The design of 3BSE013242R1 module, like all INFI 90 OPEN modules, allows flexibility when creating process management. This module supports Bailey Fischer&Porter FSK digital smart transmitter and other traditional smart device transmitters and standard voltage or current input. 3BSE013242R1 digital function (IMFEC11) eliminates conversion error and improves process control accuracy. Access is always available for real-time process status. In the mode of fieldbus, all information (including process variables) is transmitted digitally between the FEC module and the field device. The FEC module stores process data, control commands, and transmitter configuration data in memory. It can recover communication with the transmitter in case of communication failure. After the communication with the failed transmitter ter is restored, 3BSE013242R1 module checks the transmitter configuration and process control before the control module (MFP/MFC) resumes updating.
​​​​​​​