RELIANCE Y-3023-2-H00AA 艾伦-布拉德利 无刷伺服电机

RELIANCE Y-3023-2-H00AA  艾伦-布拉德利 无刷伺服电机

 

Y-3023-2-H00AA技术技术参数

关于Y-3023-2-H00AA

Y-3023-2-H00AA是艾伦-布拉德利Y系列的无刷伺服电机。通常，其目的是在工业机器上执行复杂的定位和完美的速度应用以及加速度控制。是轻工Y系列中框架尺寸大的伺服电机。其绕组在 230 伏交流电压下工作。提供光学编码器线路数，不包括中断选项。Y-3023-2-H00AA伺服电机高能磁铁（钕）提供低惯性，可快速加速。其额定转速为 4500 RPM。获得 IP43 级外壳保护。Y-3023-2-H00AA 有 8 极。

Y-3023-2-H00AA的特点之一是电机安装的光学编码器线路数，具有2000 P/R分辨率和换向信号。编码器电源使用 5 伏直流电压。需要伺服驱动器来完成伺服驱动器定位系统。Allen-Bradley 建议将以下伺服驱动器与以下任何伺服电机一起使用：1398-DDM-019、1398-DDM-020、2093-AM02、2094-AM02 或 2098-DSD-020。与伺服电机轴的系统连接应该是刚性的，以防止联轴器、皮带轮或皮带随着时间的推移而打滑并导致轴劣化。连接电缆应尽可能短。此模块的装运重量为 3.9 千克（8.7 磅）。其工作温度范围为 0 至 40 摄氏度（32 至 104 华氏度）。Y-3023-2-H00AA伺服电机应在标准工业环境中使用。不要将它们暴露在高湿度或高环境温度下。Y-3023-2-H00AA的尺寸为140 x 80 x 80毫米（5.57 x 3.15 x 3.15英寸）。其轴直径为16毫米（0.63英寸）。

Y-3023-2-H00AA is an Allen Bradley Y series brushless servo motor. Typically, the goal is to perform complex positioning and perfect speed applications as well as acceleration control on industrial machines. It is the servo motor with the largest frame size in the light industry Y series. Its windings operate at 230 VAC. Provides the number of optical encoder lines, excluding interruption options. Y-3023-2-H00AA servo motor high energy magnet (neodymium) provides low inertia and fast acceleration. Its rated speed is 4500 RPM. Obtaining IP43 enclosure protection. Y-3023-2-H00AA has 8 poles.


One of the characteristics of Y-3023-2-H00AA is the number of optical encoder lines installed on the motor, with a 2000 P/R resolution and commutation signal. The encoder power supply uses a 5 volt DC voltage. A servo driver is required to complete the servo driver positioning system. Allen Bradley recommends using the following servo drives with any of the following servo motors: 1398-DDM-019, 1398-DDM-020, 2093-AM02, 2094-AM02, or 2098-DSD-020. The system connection to the servo motor shaft should be rigid to prevent the coupling, pulley, or belt from slipping over time and causing shaft degradation. The connecting cable should be as short as possible. The shipping weight of this module is 3.9 kg (8.7 lb). Its operating temperature range is 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). Y-3023-2-H00AA servo motors should be used in standard industrial environments. Do not expose them to high humidity or ambient temperatures. The dimensions of the Y-3023-2-H00AA are 140 x 80 x 80 mm (5.57 x 3.15 x 3.15 inches). Its shaft diameter is 16 mm (0.63 inches).