DS200DTBBG1ABB GE端子数字连接器板

DS200DTBBG1ABB  GE端子数字连接器板

DS200DTBBG1ABB 技术规格

产品描述

GE端子数字连接器板DS200DTBBGIABB具有2个接线端子，每个接线端子中用于95根信号线。它还包含 3 个 50 针连接器。40 针连接器的 ID 是 JFF、JFG 和 JFH。它还配备了卡口连接器和 5 个跳线。

DS200DTBBGIABB高 3 英寸，长 11.5 英寸。它每个角都有 1 个孔，供安装人员将主板连接到驱动器内部的主板机架上。驱动器有多个位置，可以接受电路板的安装。但是，做法是将电路板安装在与要更换的旧主板相同的位置。这是因为连接到它的信号线和带状电缆数量众多。电缆布线非常重要。如果电缆布线不正确，可能会导致干扰，并且驱动器内部的冷却也会受到负面影响。驱动器内部有许多电源线以及信号线和带状电缆。如果电源线布线太靠近信号线，可能会干扰信号。这可能会导致电路板发送和接收的信号不准确。解决方案是将电源线尽可能远离信号线。DS200DTBBGIABB电缆布线不当可能导致的另一个问题是驱动器内的气流减少。如果电缆束阻挡通风口前面或产生热量的组件周围的空气流动，则可能会发生这种情况。

The GE terminal digital connector board DS200DTBBGIABB has 2 wiring terminals, each for 95 signal lines. It also includes three 50 pin connectors. The IDs for the 40 pin connector are JFF, JFG, and JFH. It is also equipped with a bayonet connector and five jumpers.
DS200DTBBGIABB is 3 inches tall and 11.5 inches long. It has a hole in each corner for the installer to connect the motherboard to the motherboard rack inside the drive. The driver has multiple locations and can accept circuit board installation. However, the practice is to install the circuit board in the same location as the old motherboard to be replaced. This is due to the large number of signal lines and ribbon cables connected to it. Cable routing is very important. If the cable routing is incorrect, it can cause interference and negatively affect the cooling inside the drive.

There are many power lines, as well as signal lines and ribbon cables inside the drive. If the power cord is routed too close to the signal line, it may interfere with the signal. This may result in inaccurate signals being sent and received by the circuit board. The solution is to keep the power cord as far away from the signal line as possible. Another problem that can be caused by improper cabling of the DS200DTBBGIABB cable is reduced airflow within the drive. This can happen if the cable bundle blocks the flow of air in front of the vent or around components that generate heat.