DS200GSIAG1ABA GE通用再生板 能够根据现场的处理需求配置板

DS200GSIAG1ABA  GE通用再生板  能够根据现场的处理需求配置板


DS200GSIAG1ABA 技术指标

产品描述

GE通用直流母线再生板DS200GSIAG1ABA包含3个40针连接器、2个16针连接器和6个跳线。DS200GSIAG1ABA板还具有 1 个 8 针连接器和多个测试点。所有连接器都是键控的，因此电缆只能单向连接。也就是说，您不能将电缆倒置插入。40 针连接器和 16 针连接器通常连接到带状电缆上，由于它们容易损坏，因此需要考虑。断开带状电缆时，用一只手紧紧抓住塑料连接器，用另一只手防止电路板本身移动。从DS200GSIAG1ABA主板上的连接器中拔出带状电缆。如果通过握住电缆的带状部分将电缆拉出，则会对连接器施加压力，并可能导致细线与塑料连接器分离。

DS200GSIAG1ABA板具有 6 个跳线，使用户能够根据现场的处理需求配置板。您可以使用工厂原装板随附的手册来了解有关跳线定义的处理选项的更多信息。一些跳线不是用于定义加工要求，而是仅用于制造过程中。但是，当您更换电路板时，请检查旧电路板并注意跳线的设置方式。使用印在电路板上的跳线 ID 来识别跳线。

The GE Universal DC Bus Regeneration Board DS200GSIAG1ABA includes three 40 pin connectors, two 16 pin connectors, and six jumpers. The DS200GSIAG1ABA board also has an 8-pin connector and multiple test points. All connectors are keyed, so cables can only be connected in one direction. That is, you cannot insert the cable upside down. "40-pin and 16-pin connectors are typically connected to ribbon cables, and they need to be considered because they are prone to damage.". When disconnecting the ribbon cable, tightly grasp the plastic connector with one hand and prevent the circuit board from moving with the other hand. Unplug the ribbon cable from the connector on the DS200GSIAG1ABA motherboard. If you pull the cable out by holding the ribbon portion of the cable, it can exert pressure on the connector and may cause the thin wires to separate from the plastic connector.

The DS200GSIAG1ABA board has six jumpers, enabling users to configure the board according to on-site processing requirements. You can use the manual that comes with the factory's original board to learn more about the processing options for jumper definitions. Some jumpers are not used to define machining requirements, but are only used during the manufacturing process. However, when you replace a circuit board, please check the old circuit board and pay attention to the way the jumper is set. Use the jumper ID printed on the circuit board to identify the jumper.




品牌介绍：

通用电气自动化和控制部门合并了以前称GE智能平台和阿尔斯通的电力自动化与控制。2019年，GE智能Platforms被艾默生电气收购，现在称为机器自动化解决方案。GE自动化与控制生产可编程逻辑控制器（PLC）和可编程基于自动化控制器 （PAC） 的控制系统、I/O 和现场设备，包括支持设计、调试和运营工业资产和运营。服务的行业包括制造业、食品和饮料、生命科学、电力、石油和天然气、采矿和金属、水以及废水和特种机械行业。




欢迎访问厦门雄霸

销售经理： 张小姐

电子邮件 ID ： 3433465711@qq.com 

微信 ： 15359317083

手机： +86 15359317083

在线客服：3433465711